J&B Industries Inc.
9 Krieger drive, Unit A
Travelers Rest, South Carolina 29690
Manufacturer of Rotary Tube Cutting Equipment
Flying Cut Off & Plate-Up Units
The flying cut off has a J&B designed encoder system measures the length to be cut as well as the speed that the tubing from the tube mill is traveling. If the tube mill changes speed, the encoder will tell the tube cutter's PLC that this has occurred.
The cutting head is mounted on a plate that is mounted to a servo driven ball screw. Each tube cutter includes tooling for one (1) diameter of tubing and Owner's Manual
We also offer a plate-up unit that can be mounted to an existing tube cutter for a mill or replace a saw. This option is available for all models, which comes without electrics.
Standard Components
-
Cut depth adjustment done while machine is in production
-
Quick change tooling and diameter changeover
-
Square weldment base with interlocked safety guarding
-
No more than 90psi is required
-
Capable of working with either Bottom or Centerline tube mill.
-
Available in either Left to Right or Right to Left feed direction
-
Maximum mill speed is 40fpm
Standard Electrical Components*
-
480 Volt
-
3 phase/60htz
-
24VDC Controls
-
Allen Bradley PLCs
-
Touch screen for Operators Station (Flying Cut-offs only)
*Customer specifications can be met
Available Models:
JB125 - capable of cutting up to 1.125" diameter tubing with up to .070" wall. An optional pull-apart is available for Centerline tube mills
JB200 - capable of cutting up to 2.0" diameter tubing with up to .100" wall for bottom line tube mills.
JB400 - capable of cutting up to 4.0" diameter tubing with up to .125" wall for bottom line tube mills.
JB600 - capable of cutting up to 6.0" diameter tubing with up to .250 wall for bottom line tube mills.