top of page

Hitch Feed Machines

Our hitch feed machines have servo driven ball screws that will feed tubing to a desired length.  If the tubing is in coil form, we can pull it from the coil and run it through a two plane straightener before it is fed to length.  These machines can cut copper, steel, stainless steel, aluminum, and coated brake lines.  Each tube cutter includes tooling for one (1) diameter of tubing and Owner's Manual 

Standard Components

  • Cut depth adjustment done while machine is in production

  • Quick change tooling and diameter changeover

  • Square weldment base with interlocked safety guarding

  • No more than 90psi is required

  • Available in either Left to Right or Right to Left feed direction

Standard Electrical Components*

480 Volt

3 phase/60htz

24VDC Controls

Allen Bradley PLCs

*Customer specifications can be made

Available Models:

JB125 - capable of cutting up to 1.125" diameter tubing with up to .070" wall.  An optional pull-apart, two plane straightener and coil payoff are available

JB200 - capable of cutting up to 2.0" diameter tubing with up to .100" wall.  An optional pull-apart , two-plane straightener and coil payoff are available; with tubing and wall thickness limitations.

JB400 - capable of cutting up to 4.0" diameter tubing with up to .125" wall.   The pull-apart option is not available on this unit.

JB600 - capable of  cutting up to 6.0" diameter tubing with up to .250 wall.   The pull-apart option is not available on this unit.


 

bottom of page